Guitar Files

Character and Usage:
Each file has 2 different width of blades to cut the slots on guitar nut. 3 pcs in 1 set, 3 types of set for acoustic guitar, electric guitar and electric bass.
The file grips are coated with anti-slip rubber, have comfortable hold and easy to control.
Operating Direction: One-way

Character and Usage:
These files are used to file the fret crown to round shape (Cross section), and remove the burrs and sharp points on fret ends. They have 3 width specifications (1mm/2mm/3mm).
Strapped with a rubber anti-slip sleeve for comfortable use.
Operating Direction: One-way

Character and Usage:
These files are used to file the fret crown to round shape (Cross section), and remove the burrs and sharp points on fret ends. They have 3 width specifications (1mm/2mm/3mm).
Their grips are coated with anti-slip rubber, have comfortable hold and easy to control.
Operating Direction: Two-way

Character and Usage:
These files are plated 300 grit emery on both edge sides. Use them to file the fret crown to round shape (Cross section), and remove the burrs and sharp points on fret ends. They have 3 width specifications (1mm/2mm/3mm).
Their grips are coated with anti-slip rubber, have comfortable hold and easy to control.
Operating Direction: Two-way

Character and usage:
The ring shape is easy to hold and control.
These files are plated emery (300 grit or 600 grit ) on outer edge, have 3 width specifications (1mm/2mm/3mm). Use them to touch the fret crown at one point, can locate accurately where need to be filed.
Operating Direction: Two-way

Character and usage:
Two files are installed in a wood handle with different angles.
90° right-angle file is used for the uniform leveling of fret ends.
25° file is used for beveling fret ends before dressing and polishing.
Operating Direction: One-way

Character and usage:
Assembled with a wood handle.
This file is used to file straightly across multiple frets to make them in same height.
Operating Direction: One-way

Character and usage:
3pcs in a set (Width 1mm, 2mm, 3mm), both edge sides have teeth. Use it to clean and flatten the bottom of saddle slot.
Operating Direction: One-way

Character and Usage:
These files are used to trim the nut and saddle to proper size and shape. 2 pcs in a set, each file has 2 sides with teeth, total 4 densities of teeth ( Coarse, medium, fine & extra fine) for use, coarse and medium teeth to remove materials quickly, fine and extra fine teeth to polish the surface.
The grips are coated with anti-slip rubber, have comfortable hold and easy to control.
Operating Direction: One-way